How To Level Ground For Pool

How to level the ground for a pool without digging.

How to level ground for pool. Drive wooden or plastic stakes around the area to be leveledStep 2 Use a string level. Therefore leveling the ground on the location where you would like to install the pool is definitely necessary. What Youll Need to Level The Ground.

To obtain this you may have sod to remove or a mountain to move or 10 tons of fill dirt to smooth and pack. Start rolling the tamper on the ground in order to level the ground. No two yards are the same.

The first thing you must remember is you have to check to see if the ground is level within 2 inches from the shallow end to the deep end. At this point you can easily measure the distance between the bottom of the 2-by-4 to the ground. Once done gently lift and lower one end of the 2-by-4 boards until it indicates that it is level.

To level ground for a pool dig away slopes and high spots to make them level with lower areas. Once the leveling is underway periodically check your progress by laying a carpenters level on top of a wood plank to see if your work surface if even. We put old carpeting down to cushion the bottom of the pool from the rocks which stick up.

However such a surface is not smooth and can damage your pool over time you can add sand ground cover or ground tarp on top. There is an easy way to do this. Next lay the attached boards on the ground where the pool will be and put a level on top.

A 15 round pool requires 3 tons of sand or about 2 yards A 18 round ground pool requires about 4 tons of sand or about 25 yards A 21 round pool requires about 45 tons of sand or about 3 yards. Above Ground Pool Deck and Awning. Drill a hole through at the very middle of the spanned pool size and drive a metal rod through the hole.